gccovet
04-17 10:19 AM
it is on the approved labor certificate, that my lawyer gave me
How to find associated SOC code with DOT code (DOT code is on LC certification, OCC code , Ind COde and OCC title is on certified LC)? I tried to find my case in the MS Access databases (from year 2001 to 2007) but could not find my case at all. My PD is May 2004, and LC certified March 2006(was sent to Backlog Center in Dallas), which MS Access database do I need to look into?
My title on LC is programmer analyst (OCC code= 030.162-014), read thru the forum replies, found that programmer analyst have OCC code= 030.162-014 and SOC code=15-1031, most of them found their SOC code from MS Access database(some found in their Certified LC??? ). I am presuming my SOC code to be 15-1031, but wanted to confirm that. I am debating on invoking AC21, but need to make certain SOC code matches with future employer (future employer gave me job code as 15-1031) as my future title will be totally different (instead of programmer analyst, it will be IT Business Specialist).
Any help/hint will be highly appreciated.
Regards,
GCCovet
How to find associated SOC code with DOT code (DOT code is on LC certification, OCC code , Ind COde and OCC title is on certified LC)? I tried to find my case in the MS Access databases (from year 2001 to 2007) but could not find my case at all. My PD is May 2004, and LC certified March 2006(was sent to Backlog Center in Dallas), which MS Access database do I need to look into?
My title on LC is programmer analyst (OCC code= 030.162-014), read thru the forum replies, found that programmer analyst have OCC code= 030.162-014 and SOC code=15-1031, most of them found their SOC code from MS Access database(some found in their Certified LC??? ). I am presuming my SOC code to be 15-1031, but wanted to confirm that. I am debating on invoking AC21, but need to make certain SOC code matches with future employer (future employer gave me job code as 15-1031) as my future title will be totally different (instead of programmer analyst, it will be IT Business Specialist).
Any help/hint will be highly appreciated.
Regards,
GCCovet
wallpaper Half Sleeve Tattoo Designs For
jotv
11-19 01:09 PM
thank you for your reply .
i have another question is i took the dd in hdfc is 4322/- by combinding 4000+322. is this the correct way or should i have to take two different ?iam lokking for first time h1b visa stamping .i already mentioned this.
before going to interview i have to take any other dd like h4 persons will do? if yes how much ? because i read some where 20,000 for blanket petition .
please tell me what documents i have to take to the interview? is there any sample questions list ?
i appriciate your help really.
i have another question is i took the dd in hdfc is 4322/- by combinding 4000+322. is this the correct way or should i have to take two different ?iam lokking for first time h1b visa stamping .i already mentioned this.
before going to interview i have to take any other dd like h4 persons will do? if yes how much ? because i read some where 20,000 for blanket petition .
please tell me what documents i have to take to the interview? is there any sample questions list ?
i appriciate your help really.
jmafonseca
November 9th, 2004, 09:11 AM
Hi all, my first post here. The forum has been truly useful so far and I'm glad to join today. I was one of those just lurking around but now I really need the feedback from D70 experts here since my 6 month old D70 won't work anymore overnight. I just put it back in the shock-proof case and it slept there, next morning it was no longer usable.
It seems like it's resetting constantly by itself. The MENU key shows the menu briefly and disappears, the last picture review button shows the last picture on the flash card briefly and also disappears.
When there's a card in it blinks the green light about once a second. Seems like it's really rebooting every second.
There is no display on the control LCD near the on/off switch. It is blank and does not show any traces of anything, just plain blank.
On the big LCD preview screen it is normally blank but like I said it does briefly display the last picture taken when you press review, but then disappears also at 1 second interval.
When the menu shows briefly after pressing MENU the movement keys do not affect the selection, all keys seem disabled during that brief period of time.
I've changed batteries, lenses, pushed every button and checked the lens socket connectors to see if anything looked strange - everything seems ok here. Tested the same batteries on another D70 and worked perfect just this morning.
It has taken no shocks or beating. It's a brand new D70 (6 months and a few days) and my retailer denies me warranty after 6 months - Murphy's Law applied to warranties says your equipment will break exactly after the warranty voids. I feel like I've been ripped off buying a refurbished piece for the price of a new one...but that's for another discussion.
I've written Nikon a few minutes ago but in the meantime I'd like to know if anyone here knows of a "keylock" switch or something that could disallow me access to the camera. Or could be a stuck reset switch or something like that. The menu shows and the internal mechanism is ok because it can read the last photo and displays readable stuff. The reset on the bottom of the camera does not seem ot reset anything, it just blanks the screen out briefly but then it goes back into an infinite reboot loop.
Help please!
Thanks and glad to join this forum.
It seems like it's resetting constantly by itself. The MENU key shows the menu briefly and disappears, the last picture review button shows the last picture on the flash card briefly and also disappears.
When there's a card in it blinks the green light about once a second. Seems like it's really rebooting every second.
There is no display on the control LCD near the on/off switch. It is blank and does not show any traces of anything, just plain blank.
On the big LCD preview screen it is normally blank but like I said it does briefly display the last picture taken when you press review, but then disappears also at 1 second interval.
When the menu shows briefly after pressing MENU the movement keys do not affect the selection, all keys seem disabled during that brief period of time.
I've changed batteries, lenses, pushed every button and checked the lens socket connectors to see if anything looked strange - everything seems ok here. Tested the same batteries on another D70 and worked perfect just this morning.
It has taken no shocks or beating. It's a brand new D70 (6 months and a few days) and my retailer denies me warranty after 6 months - Murphy's Law applied to warranties says your equipment will break exactly after the warranty voids. I feel like I've been ripped off buying a refurbished piece for the price of a new one...but that's for another discussion.
I've written Nikon a few minutes ago but in the meantime I'd like to know if anyone here knows of a "keylock" switch or something that could disallow me access to the camera. Or could be a stuck reset switch or something like that. The menu shows and the internal mechanism is ok because it can read the last photo and displays readable stuff. The reset on the bottom of the camera does not seem ot reset anything, it just blanks the screen out briefly but then it goes back into an infinite reboot loop.
Help please!
Thanks and glad to join this forum.
2011 half sleeve tattoo gallery
Ramba
07-29 07:15 PM
Ahem.. ? :confused:
Technically speaking, an immigrant visa should be immediately available to approve her 485. So, she needs to wait till her PD (which is in fact yours), become current again. You may contact a lawyer orCongressman/Senaters or USCIS regarding this situation. But I doubt it will yield any positive results. As she is a derivative applicant, she will have no problem in approval, except the waiting game. If it going to be very long, once you acquire a citizenship, you can file a I-30 for her and she will become GC holder immediately.
Technically speaking, an immigrant visa should be immediately available to approve her 485. So, she needs to wait till her PD (which is in fact yours), become current again. You may contact a lawyer orCongressman/Senaters or USCIS regarding this situation. But I doubt it will yield any positive results. As she is a derivative applicant, she will have no problem in approval, except the waiting game. If it going to be very long, once you acquire a citizenship, you can file a I-30 for her and she will become GC holder immediately.
more...
chanduv23
12-11 06:49 AM
^^^^^^^^^^
srinivas_o
09-16 02:11 PM
Hello Gurus,
I am July 2nd filer like so many others. I have changed employer after 9 month of filing I-485. I-140 was approved in Jun 2007. I have AP approved.
My question : Is it advisable to travel to India and come back on AP? the reason I am asking is I have changed the employer? Will that affect my entry back to USA in any way at immigration check? Please advise.
Thanks in advance.
--Srinivas
I am July 2nd filer like so many others. I have changed employer after 9 month of filing I-485. I-140 was approved in Jun 2007. I have AP approved.
My question : Is it advisable to travel to India and come back on AP? the reason I am asking is I have changed the employer? Will that affect my entry back to USA in any way at immigration check? Please advise.
Thanks in advance.
--Srinivas
more...
.jpg "half sleeve tattoo for women.")
yabadaba
06-18 11:59 AM
part1:
Date of Last Arrival (mm/dd/yyyy)
since i did not get that stamped on my passport...do i put in the date that i last got the stamp when i last entered?
Date of Last Arrival (mm/dd/yyyy)
since i did not get that stamped on my passport...do i put in the date that i last got the stamp when i last entered?
2010 half sleeve tattoo for women.
Ann Ruben
04-17 12:22 PM
As you understand there is no magic correct solution to this situation, but, whichever decision you make about which line your mother-in-law stands in, she should be well prepared to document her intention to return to her home abroad after her visit to the US. Documents she should be prepared to show could include: proof of home ownership or long term lease abroad, proof of bank accounts abroad, proof of car ownership abroad, fixed date return ticket, proof of family abroad--husband and/or other children/grandchildren, proof of some specific event she plans to attend abroad such as wedding or other invitations, etc.
more...
doubleyou
05-20 11:31 AM
Pappu, Thanks for the link it is informative and looks like IV had raised the namecheck issue. Let us see if there are other members on IV still experiencing FBI check delay.
Maybe then a retouch of the issue will be helpful.
Maybe then a retouch of the issue will be helpful.
hair men, Half
jsb
08-31 09:43 AM
Is it Received date or Notice date?
There is a separate thread on Receipt Date/Notice Date. Note that on the Processing Dates page, USCIS makes reference to 'receipt notice date', which is close to date a processing center received the case (which in some cases, is several months later than the date stamped on your receipt, which is the date USCIS received your case in the mailroom).
Also Published dates appear to be to indicate last case processed. Thus if published date for a processing center is Aug 31, 2007, it means that the center believes that all cases prior to this date have been processed. It does not mean they have not seen, or will not see, any cases received (by the center) after this date.
Further, strict sequenced processing is not feasible. Cases are distributed to IO's in lots. Thus if case 1-100 are given to A, and 101-200 are given to B, and both begin working at the same time starting at first case they have in their lot, case 101 will be seen much earlier than case 100, etc.
There is a separate thread on Receipt Date/Notice Date. Note that on the Processing Dates page, USCIS makes reference to 'receipt notice date', which is close to date a processing center received the case (which in some cases, is several months later than the date stamped on your receipt, which is the date USCIS received your case in the mailroom).
Also Published dates appear to be to indicate last case processed. Thus if published date for a processing center is Aug 31, 2007, it means that the center believes that all cases prior to this date have been processed. It does not mean they have not seen, or will not see, any cases received (by the center) after this date.
Further, strict sequenced processing is not feasible. Cases are distributed to IO's in lots. Thus if case 1-100 are given to A, and 101-200 are given to B, and both begin working at the same time starting at first case they have in their lot, case 101 will be seen much earlier than case 100, etc.
more...
ashkam
06-25 01:02 PM
I see what you are saying now, you were paid retroactively this year for work done last year. Since that pay will be reflected in this year's W2, you should be fine with the IRS. I am not sure how this will square up with the USCIS though. Talking to a good immigration attorney is a good idea.
hot half sleeve arm tattoo
pappu
05-11 12:51 PM
can we listen to this program online?
more...
house half sleeve tattoo cross.
kaisersose
07-27 02:54 PM
What document contains information about my job requirements? Will I-140 have all those information... Also, as per my employer I-140 is approved and I am not sure if they would give that Petition Number?.. What other option I have to get this information. Would really appreciate if any one could help me out.
The job order will contain the job description. This will be in the Labor Application. Usually when a 140 is being applied, the employer will provide you the job order and tell you to ensure your experience letters are in line with the Job order.
You will need the 140 number. See if you can get it somehow. Since it belongs to the employer, I doubt you can get the number by calling USCIS.
The 485 is yours and you should get a receipt. With this receipt, you can invoke AC21 without any problems. You will not need copies of Labor or 140.
The job order will contain the job description. This will be in the Labor Application. Usually when a 140 is being applied, the employer will provide you the job order and tell you to ensure your experience letters are in line with the Job order.
You will need the 140 number. See if you can get it somehow. Since it belongs to the employer, I doubt you can get the number by calling USCIS.
The 485 is yours and you should get a receipt. With this receipt, you can invoke AC21 without any problems. You will not need copies of Labor or 140.
tattoo Skull half sleeve tattoo.
satishku_2000
06-08 01:28 AM
u got it all wrong there, there is goin to be an h1b increase, the business community wants it, they'll get it wether anyone likes it or not and with that will come all those durbin/ron hira amendments and all this will happen b4 the next h1b date so its a matter of time b4 it all happens again
Yeah there is always a possibility that they may consider the H1B reform separately. If and when they consider H1B reform on its own , there would be much more focus on the details of the bill.
People like Ron Hira and Sanders cannot overplay their hand .
Yeah there is always a possibility that they may consider the H1B reform separately. If and when they consider H1B reform on its own , there would be much more focus on the details of the bill.
People like Ron Hira and Sanders cannot overplay their hand .
more...
pictures half sleeve tattoo for women.
kmdhar
10-12 04:09 PM
Here is my recent experience. I have only 2yrs out of 6yrs of H1B.Recently i applied for extension(applied for 3yrs instead of 2yrs based on approved 140) and received RFE from USCIS and asked for approved copy of 140. We send it and got the approval.
Thanks
Thanks
dresses half sleeve tattoo ideas. half
Refugee_New
04-08 11:58 AM
I called the TSC IO a few times and finally it got cleared. Yes my PD is current and I wish the case gets assigned to some one soon.
These IO's knows nothing and they talk all bullshit. They keep on changing the story whenever you call them. Thats what happened in my case.
In Feb '08 my NC was pending
Mid Feb' 08 NC cleared
March 1st, NC pending
March 15, NC cleard and good to go
March 26, NC pending and waiting to be assigned to officer
April4th, NC pending and still waiting to go to an officer.
These IO's knows nothing and they talk all bullshit. They keep on changing the story whenever you call them. Thats what happened in my case.
In Feb '08 my NC was pending
Mid Feb' 08 NC cleared
March 1st, NC pending
March 15, NC cleard and good to go
March 26, NC pending and waiting to be assigned to officer
April4th, NC pending and still waiting to go to an officer.
more...
makeup my half sleeve leg tattoo
rakesh_one
10-10 10:47 AM
You have another option of attaching both the old and new fees in 2seperate checks along with a letter explaining your case,you can add in the letter that they could cash the check they felt right and return the other check.My attorney did this for me one time.You also consult your attorney for the same.
I faced similar issue on EAD. I have put two checks. One for 180 and other for 160. (total of 340). I have put a self addressed , pre-payed envelope and wrote a letter asking if they deem the fee is 180, then they can return or destroy the 160 check. I my case, they used both the checks and discorded the envelope.
I faced similar issue on EAD. I have put two checks. One for 180 and other for 160. (total of 340). I have put a self addressed , pre-payed envelope and wrote a letter asking if they deem the fee is 180, then they can return or destroy the 160 check. I my case, they used both the checks and discorded the envelope.
girlfriend half sleeve of some japanese
sg72
09-29 12:42 PM
My case is totally different. We applied on July 2nd and my wife got her EAD last week but my EAD not yet approved. Is it normal?
hairstyles Half sleeve tattoo
krishna_brc
03-25 08:12 PM
My case details below:
EB3 INDIA
PD of Jul 2004.
I am still working for same GC sponsoring employer since last 5 years. I still perform the same job title/job duties as mentioned in labor.
My employer had mentioned a salary of 87,000$ in my labor.
My 485 was filed way back in Sep 2004.
My 140 was approved way back in Nov 2004.
Thanks.
You should be fine as long as your W2's are higher than what is specified in H1 LCA.
You GC Labor Wages are for furure job.
Thanks,
Krishna
EB3 INDIA
PD of Jul 2004.
I am still working for same GC sponsoring employer since last 5 years. I still perform the same job title/job duties as mentioned in labor.
My employer had mentioned a salary of 87,000$ in my labor.
My 485 was filed way back in Sep 2004.
My 140 was approved way back in Nov 2004.
Thanks.
You should be fine as long as your W2's are higher than what is specified in H1 LCA.
You GC Labor Wages are for furure job.
Thanks,
Krishna
mrjonie
03-09 05:20 PM
Received by USCIS on June 4th 2007. Have been waiting since.
So 400+ days for me too...
I totally agree with all you guys on the delay in 140..I was also in the same situation...Applied 140/485 in the July/August 2007 fiasco in EB3 (PD Dec 2006) ..After a long wait, received a mail on Feb 26th 2009 , stating that my 140 is approved...
Good luck to you follks..lets hope for the best...
So 400+ days for me too...
I totally agree with all you guys on the delay in 140..I was also in the same situation...Applied 140/485 in the July/August 2007 fiasco in EB3 (PD Dec 2006) ..After a long wait, received a mail on Feb 26th 2009 , stating that my 140 is approved...
Good luck to you follks..lets hope for the best...
whattodo
12-26 08:20 PM
Well said, Kumar1. It seems like you have done PhD on immigration matters. :)
H1/H4/L1/L2... - Non-Permanent Resident Alien
F1/F2 - Non-Permanent Non-resident Alien.
Green Card - Permanent Resident Alien.
Citizen - Naturalized citizen
Resident and Non-resident make a difference in taxation.
Non Permanent Resident Alien - If you are on H-1, they call you non-permanent resident alien. �Non-Permanent� because you are on a temporary visa, resident because IRS treats you just like any other US citizen living in that state.
Non-Permanent Non-Resident alien - Foreign students fall in this category (but it is not limited to them). �Non Permanent� comes from F-1 visa which is a temporary visa and Non Resident because you do not have intentions to live in the US permanently (or at least that is the farce that US embassy wants to listen). If you are on F-1 visa during, that time period you are not supposed to pay social security (6.5%) and Medicare taxes. Thanks to Non-Resident status. This is also applicable during 1 year OPT work permit that comes after F1.
Permanent Resident Alien - Permanent word is there because you have long term visa (yes, green cars is nothing but a long term visa) and resident because IRS will tax you like any other resident citizen.
Let me know if I am wrong anywhere. Thanks
H1/H4/L1/L2... - Non-Permanent Resident Alien
F1/F2 - Non-Permanent Non-resident Alien.
Green Card - Permanent Resident Alien.
Citizen - Naturalized citizen
Resident and Non-resident make a difference in taxation.
Non Permanent Resident Alien - If you are on H-1, they call you non-permanent resident alien. �Non-Permanent� because you are on a temporary visa, resident because IRS treats you just like any other US citizen living in that state.
Non-Permanent Non-Resident alien - Foreign students fall in this category (but it is not limited to them). �Non Permanent� comes from F-1 visa which is a temporary visa and Non Resident because you do not have intentions to live in the US permanently (or at least that is the farce that US embassy wants to listen). If you are on F-1 visa during, that time period you are not supposed to pay social security (6.5%) and Medicare taxes. Thanks to Non-Resident status. This is also applicable during 1 year OPT work permit that comes after F1.
Permanent Resident Alien - Permanent word is there because you have long term visa (yes, green cars is nothing but a long term visa) and resident because IRS will tax you like any other resident citizen.
Let me know if I am wrong anywhere. Thanks
No comments:
Post a Comment